Stringing Rollers CE for pulling out conductors, Art.No.2006 – 2013
“Made in Germany”
Quality assurance measures:
– with CE-Sign
– Permanent development and improvement of tools
– Improve manufacturing processes
– TÜV-certified quality management system according to ISO 9001: 2008
- Lightweight: aluminum roller with brass bushing </ li>
- Corrosion protection: Housing and bearing bolts made of galvanized steel </ li>
- Easy to use:
Wingscrew for lateral opening are used for preliminary fixing when tensioning the lines
through the wing nuts, open the housing sideways to thread cables and cables and
to remove the pull-out rollers again after tensioning.
- with rigid supension hook (Type a)
- galvanized steel bolts and frame
- sheave of aluminium with brass bushing
- Side opening with securing wing nut
-
|
| Article-No. |
|
2006 |
2013 |
| Type |
|
a |
a |
| Sheave-Ø |
mm |
115 |
200 |
| for Rope-Ø |
mm |
16 |
29 |
| Rope Cross-Section |
mm² |
150 |
500 |
| Sheave width |
mm |
26 |
42 |
| Breaking Load |
approx. kg |
600 |
800 |
| WLL |
kg |
150 |
200 |
| weight |
approx. kg |
1.000 |
2.480 |
|
The Stringing Rollers are certified by TÜV according to ISO 9001: 2008.
All Stringing Rollers are stamped with the CE-symbol, as well as with:
breaking load / WLL, manufacturing month and year, type designation and DIN No.
Directions for use:
Before each use check all parts for damage.
Check the roller is correctly maintained and in serviceable condition.
Warning: When using stretchers never exceed Working load Limit / WLL !
